On staturday 19 octomber, 2013 all channels on MultiTv Satellite digit box went off, no one was able to watch it. MultiTV Team said they were doing satellite upgrading which result in all channels going off.Well every problem there is way out. I want to share with you, my blog readers how to go about it.MultiTv Satellite Upgrade.You need to adjust the Frequency on your MultiTV digi box SYNDICATED BOX, STRONG BOX and SOMOTEX BOX (BLACK BOX) by doing the following
SYNDICATED BOX.
1. Press menu
2. Select ok on installation
3. Select manual search
4. Press green button to edit the frequency.
5. Select modify
6. Press ok
7. Select TP frequency
8. Press ok
9. Type in 12522
10. Press ok
11. Select polarization
12. Press the right button on the ok to change it to vertical (V)
13. Press ok
14. Select symbol rate and type in the box 27000
15. Press ok to start scanning
16. Press exit to watch or start with your channel
STRONG BOX
1. Press menu
2. Type four zeros (0000) as password
3. Scroll to manual scan
4. Press OK on manual scan
5. Press red button on the remote to select the satellite name ASTRA3A/3B
6. Press the green button to add TP list
7. Type in 12522 in the frequency
8. Select symbol rate and type in the box 27000.
9. Select right button to change to vertical (V)
10. Scroll to scan and press OK
11. Press exit to start viewing your channel
SOMOTEX BOX (BLACK BOX)
1. Press menu
2. Scroll down to start installation
3. Select TP list
4. Press the green button to edit
5. Type 12522 on the frequency
6. Press OK
7. Select symbol rate and type in the box 27000
8. Select polarity
9. Press the right button to change it to vertical
10. Select save and press OK
11. Press OK twice to start scanning
12. Press OK on yes
13. Press exit to view your channels
Great information. Lucky me I discovered your site by chance (stumbleupon).
ReplyDeleteI've bookmarked it for later!
Feel free to surf to my blog post
I will visit your site, but your site url is not available.
ReplyDelete