How to Install Software of Strong Decoders to Watch TV3- Step-by-Step

I have been receiving email from my blog readers -how they would watch scrumble TV3 channels on multiTV/Strong decoders. I must say that TV3 is one of the most watched and popular channels on multiTV. I have decided to share with you step by step how you will install the downloaded software and necessary codes you will enter after installation. 

                                     What are the step-by-step installation processes

==> Visit strong technologies downloads
==> Click on select categories and choose receiver
==> Click select  a product and choose serial number ( eg my decoder serial number is SRT 4969XII)
==> Click on submit
==> Click on download/ download link

                           How Do I install the downloaded software on the decoder

1. Transfer the file from your PC onto pen drive
2. Insert the drive into USB slot on the decoder
3. Press menu button on the remote control
4. Scroll down to USB on the TV screen
5. Press on right arrow ==> and scroll down to Data transfer
6. Press OK to start installation
                           
                            What Do I Do After Installation is completed
1. Go back to menu 
2. Select installation and enter four digit default secret code/ password ( 0000 )
3. Scroll to manual scan

4. Press OK on manual scan

5. Press red button on the remote to select the satellite name ASTRA3A/3B

6. Press the green button to add TP list

7. Type in 12522 in the frequency

8. Select symbol rate 19531.

9. Select right button to change to vertical (V)

10. Scroll to scan and press OK

11. Press exit to start viewing your channel

HEY ENJOY THIS ARTICLE? ! Subscribe to my Blog Feed in a feed reader or sign up for Free Email Updates and you'll never miss a single post. Thanks for reading my Post!

Delivered by www.kutufam.com

Enter your email address in the Box below to Receive Regular Updates in your Mailbox. Your email address is secured with us:


Delivered by www.kutufam.com